Metravi - XB-33A Auto-ranging TRMS Digital Multimeter
Description
6000 Counts, Auto-ranging, T-RMS Digital multimeter with backlit LCD display. Can measure AC T-RMS Voltage and Current, DC Current / Voltage, Frequency, Resistance, Capacitance, Temperature, Diode and Continuity Test and Non-contact Voltage Detection, along with overload protection.
The Metravi XB-33A is a 6000 Counts, Auto-ranging TRMS Digital Multimeter, with a backlit LCD display. In case if you don’t know whether two points are short, or have voltage or linear resistance, no need to worry. Just connect this multimeter and the instrument will detect automatically.
This auto-ranging digital multimeter can measure AC TRMS Voltage and Current, DC Current / Voltage, Frequency, Resistance, Capacitance & Temperature. It also has Diode and Continuity Test and Non-contact Voltage Detection, along with overload protection to against incorrect connections.
Additional information
| Brand | Metravi |
| Colour | Blue-Black |
| Model | XB-33A |
| Display | Backlit LCD |
| T-RMS | T-RMS |
| Polarity | Automatic |
| Data Hold | Data Hold |
| Low Battery Indication | Low Battery Indication |
| Overload Indication | Overload Indication |
| NCV Detection | Non-contact Voltage Detection |
| DC Voltage Range | 0-600mV/6V/60V/600V |
| DC Voltage Accuracy | ±0.5% |
| AC Voltage Range | 0-6V/60V/600V |
| DC Current Range | 0-600uA/6000uA/60mA/600mA/6A/10A |
| DC Current Accuracy | ±1% |
| AC Current Range | 0-600uA/6000uA/60mA/600mA/6A/10A |
| Resistance Range | 0-600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ |
| Resistance Accuracy | ±1.2% |
| Capacitance Range | 0-9.999nF/99.99nF/999.9nF/9.999uF/99.99uF/999.9uF/9.999mF |
| Frequency Range | 9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz |
| Frequency Accuracy | ±0.3% |
| Duty Cycle Range | 1% to 99% |
| Temperature Range | -20°C to 1000°C |
| Temperature Accuracy | ±1.0% |
| Diode & Continuity | Diode & Continuity test |
| Power Source | Battery Operated |
| Battery Type | Alkaline |
| Battery Size | AAA |
| No of Batteries | 2 |
| Sampling Time | 3 times/sec |
| Certifications | CAT II 600V |
Specifications
- Display: 5999 counts backlit LCD
- Over-range Alert
- Polarity: Automatic
- Data Hold
- Low Battery indication
- Non-contact Voltage Detection (NCV)
- Fuses: mA range; 630mA/250V fast blow fuse, 10A range no fuse
- CATII 600V protection
- DC Voltage: 600.0mV/6.000V/60.00V/600.0V
- Accuracy: ±(0.5% reading + 2 digits)\
- AC Voltage (40~400Hz): 6.000/60.00/600.0V
- Accuracy: ±(0.8% reading + 3 digits)
- DC Current: 600.0µA/6000µA/60.00mA/600.00mA/6A/10A
- Accuracy: ±(1.0% reading + 4 digits)
- AC Current (40 to 400Hz): 600.0µA/6000µA/60.00mA/600.00mA/6A/10A
- Accuracy: ±(1.2% reading + 5 digits)
- Capacitance: 9.999nF/99.99nF/999.9nF/9.999uF/99.99uF/999.9uF/9.999mF
- Accuracy: ±(3.0% reading+ 10 digits)
- Resistance: 600.0Ω/60.00kΩ/60.00kΩ/600.0kΩ/6.000MΩ/60.00MΩ
- Accuracy: ±(1.2% reading + 4 digits)
- Frequency: 9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kZ/9.999MHz
- Accuracy: ± (0.3% reading + 4 digits), Sensitivity : 3.0V RMS
- Temperature (Requires type K thermocouple) : 20° to 1000°C
- Accuracy: -20° to 1000°C; ±(1% rdg + 5 digits) (probe accuracy not included)
- Diode Test: Test current of 1mA maximum, open circuit voltage 3.2V DC typical
- Continuity Check: Audible signal will sound if the resistance is less than approximately <40±5Ω
- Input Impedance: 10MΩ (V AC/DC)
