Metravi - WT500 Non-contact High Voltage Detector (Wrist Type)
SKU
WT500
In stock
₹ 4,725.00
(Inc. GST)
Overview
Description
The Metravi WT500 high-voltage detector is a handy, wearable instrument, which reminds the electrical worker to pay attention to safety and avoid high voltage electric shock accidents.
When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level.
This instrument can also be used for line fault detection and electroscope. Works only for single-core cables. Will not work for shielded/armoured cables.
Additional information
| Brand | Metravi |
| Model | WT500 |
| Power Source | Battery Operated |
| No of Batteries | 1 |
| Battery Size | CR1632 |
| Battery Type | Button-type CR1632 |
| Dust & Water Proof | IP54 |
| Contact or Non-contact Type | Non-contact Type |
| Voltage Detection Range | 1kV to 500kV |
| Frequency Range | 50/60Hz |
| Detecting Distance | 10cm |
| Alarm | above 60dB (from 60cm distance), LED light (visibility under 8000LX visible light) |
| Detection Mode | Automatic Trigger |
| Certifications | GB 26859-2011, GB 26860-2011 |
| Protection Level | IP54 |
| Working Temperature | -10°C ~ 40°C, below 80%RH |
SPECIFICATIONS
- Alarm Voltage Range: 1kV ~ 500KV (high voltage alarm)
- Working Frequency: 50Hz/60Hz
- Safe, practical, convenient
- New style high voltage alarm device
- Automatic voltage detection/trigger mode
- Suitable for sites having overhead high voltage lines.
- To be worn on the wrist of the operator with the alarm symbol pointing towards the direction of the fingertips.
- Non-contact induction technology
- Battery operated with standby time up to 12 months*
- All-directional induction voltage power source
- Automatic trigger-detection mode with sound and light
- Visual Alarm/Indicator : LED light (visibility under 8000LX visible light)
- Audible Alarm/Buzzer : above 60dB (from 60cms distance)
- IP54 Protection Level: Dust-proof and water-spray protection
- Works only for single-core cables.
- Will not work for shielded/armoured cables.
