Metravi - Digital AC Clamp Meter - DT-1150A

DT-1150A Digital clamp meter has a 3-1/2 digit 2000 Count LCD display and is powered by two AAA Batteries. The Unit adopts full function overload protection circuit and can be used for the measurement of AC/DC voltage, AC current, Resistance, Capacitance, Frequency and Temperature. It has a sturdy built and adopts a rotary switch that integrates Power on/off, Function selection and Range selection. It is handy and portable making it the ideal tool for electrical measurement.

SPECIFICATIONS

• Display : 3 ½ Digit 2000 counts LCD, with auto polarity conversion
• Over Range indication : OL will be shown on the LCD
• Hold : Data hold on
• Low battery indication
• AC Voltage : 2V / 20V / 200V / 750V
• DC Voltage : 200mV / 2V / 20V / 200V / 1000V
• AC Current : 20A / 200A / 1000A
• Capacitance : 9.999nF / 99.99nF / 999.9nF / 9.999μF / 99.99μF / 999.9uF
• Frequency : 9.999Hz / 99.99Hz / 999.9Hz / 9.999kHz / 99.99kHz / 999.9kHz / 9.999MHz
• Resistance : 200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ
• Temperature : 20°C ~ 750°C
• Diode and Continuity test
• Jaw Opening : Approx. 40mm
• Overload Protection
• CE CAT III 600V
• Dimension : 250(L) × 97(W) × 48(H) mm
• Weight : 345gm approx.(including battery)
• Power Supply : 3V (2pcs AAA Batteries)
• Working Environment : 0~40°C, 45% ~ 70% RH Non Condensing (When temperature is less than 10°C)
• Storage Environment : -10°C~50°C, RH is less than 80%
• Accessories: User Manual, Test Leads, K-Type Thermocouple, 2pcs battery, Soft carry case

ADDITIONAL INFORMATION