In stock
Special Price
₹ 22,538.00
(Inc. GST)
Regular Price
₹ 31,830.00
Overview
40Vmax XGT BL Brushless Cordless Wood/Bolt/T-Mode 220 N·m Impact Driver
-
Without Battery and Charger
- 40Vmax XGT BL Cordless T-Mode 210 N·m (1,860 in.lbs.) Impact Driver
- Combination of sufficient fastening performance and high cost-competitiveness achieved by carefully selecting the functions
- Aluminum hammer case + Black bumper
- Simple impact power selection:
∙ 4 modes (Max/ Hard/ Medium/ Soft for bolt)
∙ 1 T-mode (for thin metal only) - Max fastening torque: 210 N·m
• Despite increased cost-competitiveness, the max fastening torque is close to that of TD001G, the flagship model of our XGT Impact drivers
• Extended overall length ensures sufficient performance of hammer, enabling to outperform TD001G in heavy-duty operation - Light mode
• To turn on the light, set F/R change lever in the neutral position, then pull the switch trigger. To turn off the light, pull the switch trigger again
• The light turns off automatically one hour after turned on - Excellent performance in continuous heavy-duty operation
High power 40Vmax XGT Li-Ion battery reduces the current load on the controller, allowing for continuous heavy-duty operation - Constant speed control allows to operate the tool at the same speed as that at which you operate the tool on a full charged battery, even when the remaining battery capacity becomes low
- One-touch bit installation
• Smoother installation of the bit has been achieved by reducing the resistance against insertion of the bit
• By increasing the load of sleeve holding spring, we have reduced the chance of unexpected falling off of the bit - Anti-bit wobbling structure
- XPT (eXtreme Protection Technology)
- BL motor
- Soft grip
- Belt clip
- One LED job light each on both sides
Technical information
| Capacity |
Machine screw: M4 – M8 (5/32 – 5/16″) High strength bolt: M5 – M14 (3/16 – 9/16″) Steel: 22 mm (7/8") Wood (Self-feed bit): N/A mm (N/A") Standard bolt: M5 – M16 (3/16 – 5/8″) Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″) Wood (Auger bit): 24 mm (15/16″) |
| Masonry drill diameter | N/A mm (N/A”) |
| Hole saw diameter | 38 mm (1-1/2″) |
| Shank/Drive | Hex Shank 6.35 mm (1/4″) |
| No Load Speed (RPM) | Max / Hard / Med. / Soft / T mode: 0 – 3,700 / 0 – 3,200 / 0 – 2,100 / 0 – 1,100 / 0 – 2,400 |
| Impacts per minute (IPM) | Max / Hard / Med. / Soft / T mode: 0 – 4,100 / 0 – 3,600 / 0 – 2,600 / 0 – 1,400 / N/A |
| Fastening torque | Hard / Med. / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.) |
| Max fastening torque | 210 N·m (1,860 in.lbs.) |
| Max output | 520 W |
| Vibration Level |
Impact tightening of fasteners of the maximum capacity of the tool: 11.9 m/s² |
| Vibration K Factor | Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s² |
| Sound Pressure Level | 95 dB(A) |
| Sound Power Level | 106 dB(A) |
| Noise K Factor | 3 dB(A) |
| Dimensions (L x W x H) |
w/o Battery: 121 x 86 x 195 mm (4-3/4 x 3-3/8 x 7-5/8″) w/ BL4040: 121 x 86 x 252 mm (4-3/4 x 3-3/8 x 9-7/8") w/ BL4080F: 121 x 86 x 293 mm (4-3/4 x 3-3/8 x 11-1/2″) w/ BL4020 / BL4025: 121 x 86 x 245 mm (4-3/4 x 3-3/8 x 9-5/8") w/ BL4050F: 121 x 86 x 274 mm (4-3/4 x 3-3/8 x 10-3/4″) |
| Net weight | 1.7 – 2.9 kg (3.7 – 6.4 lbs.) |
