230 mm (9″) 2,200 W Angle Grinder, Large Trigger Switch
230 mm (9″) 2,200 W Angle Grinder, Large Trigger Switch
This model, targeting metal grinding operations, has achieved similar durability as GA9020, while improving cost competitiveness and realizing a lightweight and compact design
Cost-competitiveness / Compact and lightweight This model is a lightweight and compact 2,200W angle grinder with an N94 motor and has achieved weight reduction in the gear housing, etc.
Excellent maneuverability The side grip can be attached closer to the center of the wheel rotation to reduce the load on the user’s hand for improved maneuverability in grinding operation
Reduced core abrasion (Stator) core abrasion is reduced by adding a water absorption process to the nylon motor housing after molding to reduce dimensional changes of the housing in humid conditions
Improved leakage resistance Switch cover and Sponge are added to improve leakage current resistance between switch terminals
Serial number label protection The serial number label is placed in a position hidden by the wheel cover to protect the label
Three-position adjustable side grip for operator convenience
230 mm (9″) 2,200 W Angle Grinder, Large Trigger Switch
230 mm (9″) 2,200 W Angle Grinder, Large Trigger Switch
This model, targeting metal grinding operations, has achieved similar durability as GA9020, while improving cost competitiveness and realizing a lightweight and compact design
Cost-competitiveness / Compact and lightweight This model is a lightweight and compact 2,200W angle grinder with an N94 motor and has achieved weight reduction in the gear housing, etc.
Excellent maneuverability The side grip can be attached closer to the center of the wheel rotation to reduce the load on the user’s hand for improved maneuverability in grinding operation
Reduced core abrasion (Stator) core abrasion is reduced by adding a water absorption process to the nylon motor housing after molding to reduce dimensional changes of the housing in humid conditions
Improved leakage resistance Switch cover and Sponge are added to improve leakage current resistance between switch terminals
Serial number label protection The serial number label is placed in a position hidden by the wheel cover to protect the label
Three-position adjustable side grip for operator convenience
Double insulation
Technical Information
Continuous rating input:
2,200 W
Wheel diameter
230 mm (9″)
Brush diameter capacity:
175 mm(7")
Cup brush diameter capacity:
100 mm (4")
Disc paper diameter
180 mm (7″)
Rubber pad diameter:
170 mm (7″)
Hole diameter:
22.23 mm (7/8″)
No load speed:
6,600 minˉ¹
Thread:
M14x2.0
Abrasive grinding wheel diameter:
230 mm (9″)
Abrasive cut-off wheel diameter:
230 mm (9″)
Max abrasive wheel thickness:
6.5 mm (1/4″)
Diamond wheel diameter:
230 mm (9″)
Cup diamond wheel usable or not?:
mm: NO, inch: NO
Switch type:
Large Trigger
Side grip attachment position:
3 positions
Soft grip (Main handle):
No
Cutting depth:
69 mm (2-3/4″)
Vibration level:
Surface grinding w/ Normal side grip: 7.0 m/s²
Surface grinding w/ Anti-vibration side grip: 6.7 m/s²
Disc sanding w/ Normal side grip: 2.7 m/s²
Disc sanding w/ Anti-vibration side grip: 2.5 m/s²
Vibration K factor:
Surface grinding w/ Normal side grip: 1.5 m/s²
Surface grinding w/ Anti-vibration side grip: 1.5 m/s²
Disc sanding w/ Normal side grip: 1.5 m/s²
Disc sanding w/ Anti-vibration side grip: 1.5 m/s²
