Makita nut runners deliver precise torque control for higher torque and hard to reach fastening applications in production and assembly. The Makita 14.4V Cordless High Torque 3/8" Angle Nut Runner (DFL651FZ) is a torque-specific solution (25.0 – 65.0Nm)
INCLUDES: Tool Only (Battery and charger not included)
ACCURACY: Built-in L.E.D. Light illuminates work surface for better visibility in low light environments
CAPACITY: Programmable Speed Control 80-200 RPM; down shift and counterclockwise rundown capabilities
DESIGN : Pass/fail lamp audibly alerts operator to failed fastenings
DESIGN : Balancing/tethering conveniently placed holes on top and side of tool for easy balancing
Features
Without Battery and Charger
USB Programmable
"Real World" accuracy has earned certification within major automotive and aerospace assemblers achieving repeatability within 4% of mean torque
RPM and directional programming via USB port for multi-stage rundown control
Maintenance mode, tool notifies operator when calibration is due
Provides Cm > 1.67 (within +/- 10% tolerance range)
Programmable Speed Control: 80-200 RPM; down shift and counterclockwise rundown capabilities
Automatic shut-off of tool when preset fastening torque is achieved to ensure consistent repeatability
Auto Battery Shut off (ABS) disables the tool once battery capacity drops below 5%
Pass/fail lamp indicates sufficient and insufficient fastening achievement and audibly alerts operator to failed fastenings
Precision sensor informs operator of insufficient battery charge level through visual and audible indicators
Modular component design allows quick service accessibility and repair turnaround
Built to withstand continuous production line use while the modular construction provides ease of service
Built-in L.E.D. light illuminates work surface for better visibility in low light environments
Rapid Optimum Charging System charges battery in only 30 minutes
Makita nut runners deliver precise torque control for higher torque and hard to reach fastening applications in production and assembly. The Makita 14.4V Cordless High Torque 3/8" Angle Nut Runner (DFL651FZ) is a torque-specific solution (25.0 – 65.0Nm)
INCLUDES: Tool Only (Battery and charger not included)
ACCURACY: Built-in L.E.D. Light illuminates work surface for better visibility in low light environments
CAPACITY: Programmable Speed Control 80-200 RPM; down shift and counterclockwise rundown capabilities
DESIGN : Pass/fail lamp audibly alerts operator to failed fastenings
DESIGN : Balancing/tethering conveniently placed holes on top and side of tool for easy balancing
Features
Without Battery and Charger
USB Programmable
"Real World" accuracy has earned certification within major automotive and aerospace assemblers achieving repeatability within 4% of mean torque
RPM and directional programming via USB port for multi-stage rundown control
Maintenance mode, tool notifies operator when calibration is due
Provides Cm > 1.67 (within +/- 10% tolerance range)
Programmable Speed Control: 80-200 RPM; down shift and counterclockwise rundown capabilities
Automatic shut-off of tool when preset fastening torque is achieved to ensure consistent repeatability
Auto Battery Shut off (ABS) disables the tool once battery capacity drops below 5%
Pass/fail lamp indicates sufficient and insufficient fastening achievement and audibly alerts operator to failed fastenings
Precision sensor informs operator of insufficient battery charge level through visual and audible indicators
Modular component design allows quick service accessibility and repair turnaround
Built to withstand continuous production line use while the modular construction provides ease of service
Built-in L.E.D. light illuminates work surface for better visibility in low light environments
Rapid Optimum Charging System charges battery in only 30 minutes
