Makita nut runners deliver precise torque control for higher torque and hard to reach fastening applications in production and assembly. The Makita 14.4V Lithium-Ion Cordless 3/8" Square Drive Angle Nut Runner (DFL125FZ) is a torque-specification solution (5.0 - 12.0Nm)
INCLUDES : Tool only (Battery and Charger not included)
ACCURACY : "Real World" accuracy within 4% of mean torque
CAPACITY : Torque-Specification (5.0 - 12.0 N•m) for accurate installation of fasteners; 100 - 700 RPM
CONVENIENCE : Auto Battery Shut off (ABS) disables the tool once battery capacity drops below 5%
DESIGN : RPM and directional programming via USB port for multi-stage rundown control
Features
Without Battery and charger
USB Programmable
"Real World" accuracy has earned certification within major Automotive and Aerospace Assemblers achieving repeatability within 4% of mean torque
RPM and directional programming via USB port for multi-stage rundown control
Maintenance mode, tool notifies operator when calibration is due
Provides Cm > 1.67 (within +/- 10% tolerance range)
Lithium-Ion Battery for extended run time and total lifetime charge cycles (battery not included); weighs less than 12V NiCd batteries
Automatic shut off of tool when preset fastening torque is achieved to ensure consistent repeatability
Auto Battery Shut off (ABS) disables the tool once battery capacity drops below 5%
Pass/fail lamp indicates sufficient and insufficient fastening achievement and audibly alerts operator to failed fastenings
Precision sensor informs operator of insufficient battery charge level through visual and audible indicators
Built-in L.E.D. light illuminates work surface for better visibility in low light environments
Rapid Optimum Charging System charges battery in only 30 minutes (battery and charger not included)
Makita nut runners deliver precise torque control for higher torque and hard to reach fastening applications in production and assembly. The Makita 14.4V Lithium-Ion Cordless 3/8" Square Drive Angle Nut Runner (DFL125FZ) is a torque-specification solution (5.0 - 12.0Nm)
INCLUDES : Tool only (Battery and Charger not included)
ACCURACY : "Real World" accuracy within 4% of mean torque
CAPACITY : Torque-Specification (5.0 - 12.0Nm) for accurate installation of fasteners; 100 - 700 RPM
CONVENIENCE : Auto Battery Shut off (ABS) disables the tool once battery capacity drops below 5%
DESIGN : RPM and directional programming via USB port for multi-stage rundown control
Features
Without Battery and charger
USB Programmable
"Real World" accuracy has earned certification within major Automotive and Aerospace Assemblers achieving repeatability within 4% of mean torque
RPM and directional programming via USB port for multi-stage rundown control
Maintenance mode, tool notifies operator when calibration is due
Provides Cm > 1.67 (within +/- 10% tolerance range)
Lithium-Ion Battery for extended run time and total lifetime charge cycles (battery not included); weighs less than 12V NiCd batteries
Automatic shut off of tool when preset fastening torque is achieved to ensure consistent repeatability
Auto Battery Shut off (ABS) disables the tool once battery capacity drops below 5%
Pass/fail lamp indicates sufficient and insufficient fastening achievement and audibly alerts operator to failed fastenings
Precision sensor informs operator of insufficient battery charge level through visual and audible indicators
Built-in L.E.D. light illuminates work surface for better visibility in low light environments
Rapid Optimum Charging System charges battery in only 30 minutes (battery and charger not included)
