Smoothly ground gripping surfaces for damage-free gripping
Durable, load-optimised design with backlash-free box joint
High, slim sleeves for fine and comfortable gripping between thumb and index finger
Low-friction double spring for gentle and even opening
Mirror-polishing instead of chrome-plating to avoid interference in the circuit with flaking chrome parts
Edges carefully deburred
For fine cutting and assembly work, e.g. in electronics and fine mechanics
Technical attributes
Article No
35 62 145
EAN
4003773039556
Pliers
mirror polished
Head
mirror polished
Handles
with multi-component grips
Weight
86 g
Dimensions
145 x 60 x 19 mm
Standard
DIN ISO 9655
REACH compliant
does not contain SVHC
RoHS compliant
not applicable
Jaw length (B)
34.1 mm
Jaw thickness (joint) (D)
8.5 mm
Tips width (E)
2.5 mm
Tips thickness (F)
1.8 mm
Head width (A)
13.0 mm
Small, fine and safe: the electronics pliers for fine installation work
Long, round gripping surfaces for plenty of freedom of movement even where space is restricted
Electronic equipment, printed circuit boards and precision constructions such as measuring equipment or delicate apparatus are usually built in tight spaces. A compact tool is therefore needed which can also be used to work well even in poorly accessible areas. The round gripping surfaces of these precision gripping pliers are very long for ideal access also to concealed parts. With an overall length of 145 mm and their long, slim and flat head, the 35 62 145 electronics pliers from Knipex are the ideal tool for the delicate gripping, holding and bending of sensitive components. The gripping surfaces are smooth ground to protect sensitive surfaces.
Smooth operating and accurate, with box joint design and double spring
The accurate, well-measured transmission of manual force to the component is decisive to working successfully on small and sensitive components. The mechanics of the Knipex 35 62 145 are therefore very finely adjusted. The box joint is solid and smooth operating. The inner handle is guided on both sides by the outer handle. This ensures precise running without any tilting effect. The low friction double spring supports the gentle opening of the pliers, which greatly relieves strain for the user during frequently recurring hand movements.
High Knipex quality standards and safety rust protection
Quality in production, quality results in everyday work: the handles of the Knipex 35 62 145 electronics pliers are forged from special tool steel, oil-hardened, carefully deburred, mirror-polished and completed with opening spring and rivet to produce gripping pliers in accordance with the Knipex quality standard. For safety reasons, chrome-plating is not used as rust protection with these gripping pliers. Peeling pieces of chrome could result in damage to printed circuit boards. Without chrome-plating there is no such risk. A mirror polish in conjunction with a fine oil film applied in the factory protects the pliers. This corrosion protection is perfectly adequate for workshop operation if the oil film is replaced occasionally.
Gentle grip and firm hold
Even very sensitive areas such as a toothed wheel centre bore can be gripped and held gently.
Ideal for installation and dismantling work
Thanks to its slim design, the Knipex 35 62 145 is very suitable for feeding and removing components
Suitable for fine installation work
The 35 62 145 with smooth jaws is also very suitable for inserting mechanical components.
