- Durable, load-optimised design with backlash-free box joint
- Head carefully rounded: no sharp edges that could damage the material
- High, slim sleeves for fine and comfortable gripping between thumb and index finger
- Uniform bending behavior for a more direct sense of work
- Smoothly ground gripping surfaces for damage-free gripping
- Low-friction double spring for gentle and even opening
- The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools
- Flat, wide jaws, smoothly ground gripping surfaces
Technical attributes
| Article No |
35 12 115 |
| EAN |
4003773035107 |
|
Head
|
mirror polished |
| Handles |
with multi-component grips |
| Weight |
70 g |
| Dimensions |
115 x 68 x 17 mm |
| Standard |
DIN ISO 9655 |
| REACH compliant |
does not contain SVHC |
| RoHS compliant |
not applicable |
| Jaw length (B) |
22.5 mm |
|
Jaw thickness (joint) (D)
|
6.5 mm |
| Tips width (E) |
2.0 mm |
| Tips thickness (F) |
4.0 mm |
| Head width (A) |
11.0 mm |
Small and fine: electronics pliers for fine installation work
Short, smooth and good: 115 mm long for plenty of freedom of movement even where space is restricted
There is little room to move when working on electronic equipment, printed circuit boards and precision constructions such as measuring equipment or delicate apparatus. A compact tool is helpful here which can also be used to work well even in poorly accessible areas.
With a length of just 115 mm and their slim, flat head, the 35 12 115 electronics pliers from Knipex are the ideal tool for the delicate gripping, holding and bending of sensitive components. The half round, tapered gripping surfaces are smooth ground to protect sensitive surfaces.
With box joint design and double spring – smooth operating and accurate
The challenges placed on pliers are great when they are used to process small and sensitive components. The accurate, well-measured transmission of manual force to the component is crucial. The mechanics of the Knipex 35 12 115 are finely adjusted. The box joint design is solid and smooth operating, because the inner handle is guided on both sides by the outer handle, ensuring precise running without any tilting effect. The low friction double spring supports the gentle opening of the pliers.
High Knipex quality standards and safety rust protection
The handles of the Knipex 35 12 115 electronics pliers are forged from special tool steel, oil-hardened, carefully deburred, mirror-polished and completed with opening spring and rivet to produce gripping pliers. The rust protection on these electronics pliers is safe for circuits. There is no chrome-plating on the Knipex 35 12 115 – therefore no pieces of chrome can peel off and fall onto printed circuit boards. The mirror polish in conjunction with a fine oil film provides perfectly adequate corrosion protection for the pliers during workshop use. The pliers are always protected if the oil film is replaced occasionally.
For gently gripping flat material
Sensitive and delicate flat components can be gripped securely and gently with the smooth jaws.
Securely hold sensitive components
Mechanical components are held securely and inserted safely without damaging materials.
Assemble printed circuit boards with precision
The Knipex 35 12 115 is an excellent support when feeding sensitive electronic components.
DATASHEET (LINK)
