HYBRO - Auto & Manual Much Powerful Torque 3.6 voltage Hybrid Screwdriver - H500Q01

Specifications:

Torque on Electric Mode -  4 N.m

Torque on Manual Mode - 15 N.m

Speed : 250rpm

Model No : H500Q

Battery : Li-lon 3.6V  1,000mAh

Rotating Speed (Max): 250rpm

Torque (Max): 1 N.m /4 N.m (Electric) 15N/m(Manual)

Chuck: 6.35 mm (1/4") Hex Quick released chuck

Charge Rate: 70 minutes

Charging method: C type USB

USB charger input: 5 volt 1000 mAh

Weight: 180 g

Components:

• Rechargeable Screwdriver : 1EA
• USB charging cable : 1EA
• User manual : 1EA
• Bits :set (A/B)
• Keychain : 1 EA

Loosening a Screws :

• Manually rotate the driver to loosen up screw.
• Press and hold is reverse button until the screw is out.

Tightening a Screws : 

• Apply light pressure on the driver while pressing the forward button.
• Keep driving until the screw is securely engaged.
• Give a final twist by manually rotating the driver.

Torque control : 

• Press the torque setting button for 3 seconds.
• The light will be on
• Set the torque with the torch setting button

      - Red light    : Maximum 1 N.m

      - Green that : Maximum 4 Nm

• After selecting a desired torque level wait 3 seconds to finish programming.

LED function :

   - Built-in working LED.

   - Automatically switch on.

   - Light is kept for 5 seconds. after corporation.

   - Automatically switch off.