HYBRO - Auto & Manual 3.6 voltage Hybrid Screwdriver - H200Q01
Specifications:
Torque on Electric Mode - 2 N.m
Torque on Manual Mode - 10 N.m
Speed : 280 rpm
Model No : H200Q
Battery : Li-lon 3.6V 850mAh
Rotating Speed (Max): 280rpm
Torque (Max): 2 N.m (Electric) 10N/m(Manual)
Chuck: 6.35 mm (1/4") - Quick released chuck
Charge Rate: 60 minutes
Operating Rate: 40 minutes
Charging method: Micro 5pin USB
USB charger input: 5 volt 500 mAh
Weight: 160 g
Components:
- Rechargeable Screwdriver : 1EA
- USB charging cable : 1EA
- User manual : 1EA
- Component :A/B Set
Operation:-
Loosening with Screws :
- Loosen the screw as a regular hard tool screwdriver first.
- Press and hold the ∧ button.
Fastening with Screws :
- Press and hold ∇ the button.
- Tighten the screw as a regular hand tool screwdriver.
Charging:
- Charge the power tool only with the USB cable provided.
- Connect the USB cable to any possible USB charging port. (PC, Phone Charger etc)
- Possible Charger Input is 5V/0.5A, charge rate depends on the charge inout.
- Unplug the USB cable from power supply and disconnect it from the power tool once it is fully charged.
LED function :
- Red LED : Charging
- Green LED : Charged
- Built-in working LED.
- Automatically switch on.
- Light is kept for 5 seconds. after corporation.
- Automatically switch off.