In stock
₹ 10,400.00
(Inc. GST)
Overview
Descriptions
Compact true-rms meter for accurate electrical installation and troubleshooting
The Fluke 110 is a versatile multimeter for electrical measurements and troubleshooting. Trusted by residential and commercial electricians for troubleshooting and maintenance. The 110 is for professional use, where true-rms accuracy is needed.
Key product capabilities
-
True-rms ac voltage for accurate measurements on non-linear signals
-
Large white LED backlight to work in poorly lit areas
-
Resistance and continuity
-
Min/Max/Average to record signal fluctuations
-
CAT III 600 V safety rated
Specifications
General specifications |
|||
| Maximum voltage (between any terminal and earth ground) | 600V | ||
| Safety | IEC 61010-1, Pollution degree 2 IEC 61010-2-033, CAT III 600 V |
||
| Display | Digital: 6,000 counts, updates 4/sec | ||
| Bar graph | 33 segments, updates 32/sec | ||
| Temperature | |||
| Operating | -10 °C to + 50 °C | ||
| Storage | -40 °C to + 60 °C | ||
| Battery | 9 volt Alkaline, IEC 6LR61 | ||
| Battery life | 400 hours typical, without backlight | ||
| Accuracy | |||
| Measurement | Range | Resolution | Accuracy ± ([% of reading] + [counts]) |
| DC millivolts | 600.0 mV | 0.1 mV | 0.5 % + 2 |
|---|---|---|---|
| DC volts | 6.000 V | 0.001 V | 0.5 % + 2 |
| 60.00 V | 0.01 V | ||
| 600.0 V | 0.1 V | ||
| Accuracy | |||
| Measurement | Range | Resolution | Accuracy ± ([% of reading] + [counts]) |
| AC millivolts1 true-rms | 600.0 mV | 0.1 mV | 1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz) |
| AC volts1 true-rms | 6.000 V | 0.001 V | 1.0 % + 3 (dc, 45 Hz to 500 Hz) |
| 60.00 V | 0.01 V | 2.0 % + 3 (500 Hz to 1 kHz) | |
| 600.0 V | 0.1 V | ||
| Continuity | 600 Ω | 1 Ω | Beeper on < 20 Ω, off> 250 Ω; detects opens or shorts of 500 μs or longer. |
| Ohms | 600.0 Ω | 0.1 Ω | 0.9 % + 2 |
| 6.000 kΩ | 0.001 kΩ | ||
| 60.00 kΩ | 0.01 kΩ | 0.9 % + 1 | |
| 600.0 kΩ | 0.1 kΩ | ||
| 6.000 MΩ | 0.001 MΩ | 5 % + 2 | |
| 40.00 MΩ | 0.01 MΩ | ||
