Engineer - Universal Crimping Pliers - PA-20

PA-20 Connector Crimping Pliers

• More than 100 different terminals applicable
• With 1 pair of our Connector Pliers, you can crimp in tidy finishing open-barrel
• connectors such as MOLEX, TE (Tyco), JST, HRS, etc.
• D-Sub connector contact can be also crimped.
• 4-different cavities of elaborate dies
• Original joint screw prevents the joint from being loose and offers you easy maintenance.
• With locking latch and coiled spring
• Oil resistant Elastomer (TPR) handle
• Ideal for 2.5mm pitch and 5mm pitch connectors, 2.5mm-thick dies
  (#28 - #18 AWG wires)

Features

PA-20

Ideal for 2.5mm pitch and 5mm pitch connectors, 2.5mm-thick dies
(#28 - #18 AWG wires)

How to select the suitable crimping dies 

1. Measure the width of conductor barrel or insulation barrel with
a caliper while both barrel lugs are adjusted in parallel.

2.Select the die width that is close to the width of barrel lugs measured.   Example: 1.5mm measured -->> Select 1.6mm dies.

3.Conductor Barrel (Lug) Crimping :

It is better to offset the rearmost edge of conductor barrel (lug) 0.1-0.2 mm from the edge of the upper die to form a bellmouth on the edge of the crimped barrel. (as per the figure on the right)

Insulation Barrel (Lug) Crimping : 

Set the insulation barrel (lug) at the center of the upper die in depth to keep the barrel (lug) horizontal when crimping.

Specifications PA20

• Die Width ：1.6, 1.9, 2.0, 2.3mm
• Length ：175mm
• Handle Width ：52mm
• Weight ：137g
• Material ：Body/Carbon steel, Grip/TPR