In stock
Special Price
₹ 2,665.00
(Inc. GST)
Regular Price
₹ 4,100.00
Overview
Product details
- Clamping force up to:
- 200 N / 20 kg (EZS11-4)
- 750 N / 75 kg (EZM)
- 1,400 N / 140 kg (EZL)
- 2,700 N / 270 kg (EZXL)
- Conversion for spreading – tool-free with EZM, EZL, EZXL thanks to simple release mechanism at the touch of a button on the top section
- Ergonomically shaped 2-component plastic handle with pump mechanism and integrated release lever behind the rail
- Protective caps with cross prism on the top for securely holding round, pointed and angular parts
- One-handed operation with little effort required
- On carded hang pack
Technical data
| Order number | Opening | Throat depth | Spreading width | Rail | Clamping force | Content | Weight |
| mm | mm | mm | mm | N | kg | ||
| EZS11-4 | 110 | 40 | 80–190 | 7x2,5 | 200 | 2 x EZS11-4 | 0.12 |
Product description
Multiple applications
The one-handed EZ range offers numerous possible applications:
- due to a diverse range in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N
- due to the cross prism integrated in the plastic protective caps for the secure fastening of round, pointed and angular pieces
- due to conversion of the top section from clamping to spreading – with sizes EZM, EZL and EZXL tool-free thanks to release mechanism at the touch of a button
Practical convenience
The entire range offers ergonomic handling, thanks to sophisticated technology:
- due to the high quality 2-component plastic handle with pump lever behind the rail for safe access from both directions
- due to the release handle integrated in the grip for quick adjustment of the sliding bar and for releasing the clamp
Robust design
Modern aesthetics meet with longevity here:
- due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the profiled rails
- due to the plastic housing, the grip mechanism is protected from dust and chips
Areas of application
- Interior fittings
- DIY
- Furniture and joinery works
- Staircase construction
- Dry construction
- Kitchen construction and shop fitting
- One-handed clamping and spreading
Safety informations
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
Material / Surface
- Rail made of hardened steel, burnished
- Lever made of reinforced PA6 plastic
- Upper and lower section made of reinforced PA6 plastic
- Protective caps made of plastic
Care instructions
- Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
- Clean the rails with solvent.
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
