In stock
Only %1 left
As low as
₹ 4,163.00
Regular Price
₹ 6,404.00
(Inc. GST)
Overview
Product details
- Clamping force up to 1,200 N
- Change from clamping to spreading by switching, not converting
- Handle with pump lever parallel to the rail
- Convenient one-handed operation, with little effort required
- All-round clamping – in front of, behind and at the side of the rail
- On carded hang pack
Technical data
| Order number | Opening | Throat depth | Spreading width | Spreading width rear | Rail | Weight |
| mm | mm | mm | mm | mm | kg | |
|
DUO16-8
|
160 | 85 | 75–235 | 9–170 | 15x5 | 0.66 |
|
DUO30-8
|
300 | 85 | 75–380 | 9–315 | 15x5 | 0.74 |
|
DUO45-8
|
450 | 85 | 75–535 | 9–470 | 15x5 | 0.82 |
|
DUO65-8
|
650 | 85 | 75–685 | 9–660 | 15x5 | 1.02 |
Product description
Reversing
Don't disassemble the clamp – JUST TURN THE KNOB! The practical turning knob allows you to switch easily at any time from clamping to spreading.
Parallel handle with pump lever
The ergonomically shaped handle with pump lever runs parallel to the rail. That way, balanced, safe handling is always guaranteed.
Rapidly-adjustable release lever
A press of a button is all it takes: the release lever allows the clamp to be immediately released, as well as rapidly adjusted.
Large jaw faces
The large, planar jaw faces made from impact- and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.
Areas of application
- Furniture and joinery works
- Kitchen construction and shop fitting
- Interior fittings
- DIY
- One-handed cutting of strong steel straps
Safety information
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
Care instructions
- Regular maintenance is necessary – only then can a secure hold be guaranteed (no slipping of the sliding bracket).
- Clean the rails with solvent.
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents.
