Bessey - Aviation Snips 240mm - D16S

Product details 

• No offset to blades, for short, straight and curved cuts with a large radius in both left and right directions

• Edges with micro-serrations for slip-proof working

• Available only in left cutting version

Technical data

Areas of application

• Metal construction

• Interior fittings

• Dry construction

• Plumbing

• The classic for fine sheet metal work

Safety information

• Use the product only in its original condition.

• Use the product only for its intended purpose. Improper use can cause personal injury or property damage.

• Wear safety glasses to protect your eyes.

• Wear work or assembly gloves to protect your hands.

• Wear safety footwear to protect your feet.

• Thew handle must always be free of oil and grease to prevent slipping.

• Keep the product out of reach of children.

• Small parts must not be swallowed or inserted into body openings.

• Check the product for damage before each use and make sure that all moving parts are working properly.

• A damaged product must not be used.

• Follow the care instructions for each product – see www.bessey.de.

• Use only original BESSEY spare parts

• Sheet metal snips must only be used to cut thin sheets of non-hardened steel.

• The cutting tool may only be used by hand without any additional aids.

• The cutting tool must be ground regularly and professionally. Dull cutting tools increase the risk of injury.

Material / Surface

• Shears handles made of 2-component plastic with sheet metal part

• Shears head made of forged steel, burnished

• Connecting elements made of steel, galvanised or burnished

Care instructions

• Clean the rails with solvent.

• Rub the cutting edge with a lightly oiled cloth (remove material dust) in regular cycles, depending on the degree of soiling.

• Regularly oil the screw connections on the inside of the blade.

• Rusty or scratched cutting edge, gently scrape it off with an oil stone.

• If the snips exhibit too much play, adjust the screw iIt must still be possible to open and close the shears easily).